LCD Screen Display Assembly Touch Digitizer For iPad Pro 12.9 3rd Gen - Black

About the product
1. ReplacementLCD Screen Display Assembly Touch Digitizer For iPad Pro 12.9 3rd Gen A1876 A2014 A1983 A1895 / iPad 4rd Gen A2229 A2069 A2232 A2233.
2. Replace your broken or unusable item with a new one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed.
7. Please Pull Off the Power Adapter before you install the device ,if the Touch Screen not working after you install ,you can try turn off and turn on again , Please Also Check your touch cable.
8. You can clean the connector before replace it.if the Touch Screen not working after install ,you can turn off and turn on again ,Also Please Check your touch cable ,Please ask professional technicals for Advice,or you can watch a professinal video.Please be care of the corner when install LCD, The LCD may broken if you did not install it in a right way..
9. Please ensure that each Connector is fully connected during installation, otherwise it may cause touch failure. Please pay attention to this detail.

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.